(2) Power Acoustik MOFOS-12D2 12 2500 Watt Car Audio Subwoofers DVC 2-Ohm Subs

(2) Power Acoustik MOFOS-12D2 12 2500 Watt Car Audio Subwoofers DVC 2-Ohm Subs
(2) Power Acoustik MOFOS-12D2 12 2500 Watt Car Audio Subwoofers DVC 2-Ohm Subs
(2) Power Acoustik MOFOS-12D2 12 2500 Watt Car Audio Subwoofers DVC 2-Ohm Subs
(2) Power Acoustik MOFOS-12D2 12 2500 Watt Car Audio Subwoofers DVC 2-Ohm Subs
(2) Power Acoustik MOFOS-12D2 12 2500 Watt Car Audio Subwoofers DVC 2-Ohm Subs
(2) Power Acoustik MOFOS-12D2 12 2500 Watt Car Audio Subwoofers DVC 2-Ohm Subs
(2) Power Acoustik MOFOS-12D2 12 2500 Watt Car Audio Subwoofers DVC 2-Ohm Subs
(2) Power Acoustik MOFOS-12D2 12 2500 Watt Car Audio Subwoofers DVC 2-Ohm Subs
(2) Power Acoustik MOFOS-12D2 12 2500 Watt Car Audio Subwoofers DVC 2-Ohm Subs
(2) Power Acoustik MOFOS-12D2 12 2500 Watt Car Audio Subwoofers DVC 2-Ohm Subs

(2) Power Acoustik MOFOS-12D2 12 2500 Watt Car Audio Subwoofers DVC 2-Ohm Subs
(2) Power Acoustik MOFOS-12D2 12 2500 Watt Car Audio Subwoofers DVC 2-Ohm Subs. Condition: BRAND NEW IN ORIGINAL PACKAGING. (2) Power Acoustik MOFOS-12D2 12 2500 Watt Car Audio Subwoofer DVC 2-Ohm Sub.

MOFO Type S subwoofers are refined and increase efficiency dramatically! MOFO Type S subs use a composite sandwich cone with a polypropylene surface for durability and Spruce pulp backing for smooth low bass. Like the original MOFOs, the new models still use an aluminum dust cap that couples to the voice coil former and extends over the cone. The fins brace the cone and eliminate cone flex during high excursion.

And since they are aluminum and couple to the voice coil, they act as a heatsink or heat extractor. Using the latest materials, the new MOFO subs yield superior performance. Louder than the original design?

Overcompensating Motor Structure for Increased Magnetic Strength. 12mm T-Yoke & Top Plate Improve Low-Frequency Dynamics. Vented T-Yoke & Frame Reduces Voice Coil Heat Build-up. Die-Cast Aluminum Heat Sink Dust Cap Absorbs Voice Coil Heat. Aluminum Dust Cap Fins Dissipate Heat & Strengthen Cone.

Non-Magnetic Non-Resonate Die-Cast Aluminum Frame. 2.5 4-Layer Voice Coil w/ Large Gauge Wire Increases Power.

High-Temperature Tolerance Adhesives Resist Thermal Failure. Nickel Plated 8ga Spring-Loaded Compression Wire Terminals. Non-Transfer Spruce Pulp Cone w/ UV & Chemical Protection. High-Density Polyether Foam Surround w/ UV & Chemical Protection. Dual Poly-Cotton Suspension Dampen Violent Accelerations.

Stitched Voice Coil Leads Prevent Potential Damage. 1-pc Gasket/Trim Ring w/ Concealed Mounting Holes Included.

Voice Coil Configuration: 2.50? Included in this manual are a number of different enclosure suggestions. These are by no means the only enclosures to use, but they provide a starting point to determine the correct enclosure for your needs many factors must be addressed (amount of power, vehicle, placement, crossovers, etc) Therefore, as al-ways, Power Acoustik recommends that your subwoofer be installed by an authorized Power Acoustik dealer. All enclosures should be made of.

When possible, make the baffle 1.5 (1 ½) thick and add. 75" (3/4") to the depth of the enclosure to compensate.

All volumes INCLUDE vent/port and subwoofer displacements. DO NOT change the volume unless you plan on adding a substantial amount of bracing. For added performance, applying a coat of fiberglass resin to the interior walls will greatly improve sealing the enclosure. Adding a thin layer of poly-fill will improve response by smoothing out reflections within the enclosure.

Min: 1.25 cu ft. Optimum: 1.50 cu ft.

Min: 2.00 cu ft. Port WxL: 4" x 11". Opt: 2.50 cu ft. Port WxL: 4" x 13.75".

If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options. We will send you a. To replace the item for a brand new one. All replacements and exchanges are free.
(2) Power Acoustik MOFOS-12D2 12 2500 Watt Car Audio Subwoofers DVC 2-Ohm Subs